IviRFSigGen Configure Arb External Trigger Slope [ARB]
IviRFSigGenArbGenerator Capability Group
This VI configures the trigger event to occur on the rising or falling edge of the input signal.
 |
instrument handle The instrument handle that you obtain from the IviRFSigGen Initialize or IviRFSigGen Initialize With Options VIs. |
 |
slope Specifies whether the trigger event occurs on the rising or falling edge of the input signal. The driver uses this value to set the IviRFSigGen>>ARB Generator>>Trigger>>ARB External Trigger Slope property.
Defined Values: IVIRFSIGGEN_VAL_ARB_EXTERNAL_TRIGGER_SLOPE_POSITIVE - Enables rising edge triggering. IVIRFSIGGEN_VAL_ARB_EXTERNAL_TRIGGER_SLOPE_NEGATIVE - Enables falling edge triggering. Default Value: IVIRFSIGGEN_VAL_ARB_EXTERNAL_TRIGGER_SLOPE_POSITIVE |
 |
error in (no error) The error in cluster can accept error information wired from VIs previously called. Use this information to decide if any functionality should be bypassed in the event of errors from other VIs.
The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed. |
 |
instrument handle out The instrument handle that you obtain from the IviRFSigGen Initialize or IviRFSigGen Initialize With Options VIs. |
 |
error out The error out cluster passes error or warning information out of a VI to be used by other VIs.
The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed. |